inventory APIv1.6.0

bulkGetInventoryItem

POST
/bulk_get_inventory_item
This call retrieves up to 25 inventory item records. The SKU value of each inventory item record to retrieve is specified in the request payload.

The authorization header is the only required HTTP header for this call, and it is required for all Inventory API calls. See the HTTP request headers section for more information.

For those who prefer to retrieve only one inventory item record by SKU value, , the getInventoryItem method can be used. To retrieve all inventory item records defined on the seller's account, the getInventoryItems method can be used (with pagination control if desired).

Input

Resource URI (production)

POST https://api.ebay.com/sell/inventory/v1/bulk_get_inventory_item

URI parameters

HTTP request headers

All requests made to eBay REST operations require you to provide the Authorization HTTP header for authentication authorization.

OAuth scope

This request requires an access token created with the authorization code grant flow, using one scope from the following list:

https://api.ebay.com/oauth/api_scope/sell.inventory.readonly

https://api.ebay.com/oauth/api_scope/sell.inventory

See OAuth access tokens for more information.

Input container/fieldTypeDescription
requestsarray of GetInventoryItemThe seller passes in multiple SKU values under this container to retrieve multiple inventory item records. Up to 25 inventory item records can be retrieved at one time.

Occurrence: Optional

requests.skustringAn array of SKU values are passed in under the sku container to retrieve up to 25 inventory item records.

Occurrence: Optional

Output

HTTP response headers

{ /* BulkGetInventoryItemResponse */
"responses" : [
{ /* GetInventoryItemResponse */
"sku" : "string",
}
]
}
Output container/fieldTypeDescription
responsesarray of GetInventoryItemResponseThis is the base container of the bulkGetInventoryItem response. The results of each attempted inventory item retrieval is captured under this container.

Occurrence: Always

responses.statusCodeintegerThe HTTP status code returned in this field indicates the success or failure of retrieving the inventory item record for the inventory item specified in the sku field. See the HTTP status codes table to see which each status code indicates.

Occurrence: Always

responses.errorsarray of ErrorDetailV3This container will be returned if there were one or more errors associated with retrieving the inventory item record.

Occurrence: Conditional

responses.errors.errorIdintegerA unique code that identifies the particular error or warning that occurred. Your application can use error codes as identifiers in your customized error-handling algorithms.

Occurrence: Conditional

responses.errors.domainstringThe name of the domain in which the error or warning occurred.

Occurrence: Conditional

responses.errors.subdomainstringThe name of the subdomain in which the error or warning occurred.

Occurrence: Conditional

responses.errors.categorystringThis string value indicates the error category. There are three categories of errors: request errors, application errors, and system errors.

Occurrence: Conditional

responses.errors.messagestringA description of the condition that caused the error or warning.

Occurrence: Conditional

responses.errors.parametersarray of ErrorParameterV3Various warning and error messages return one or more variables that contain contextual information about the error or waring. This is often the field or value that triggered the error or warning.

Occurrence: Conditional

responses.errors.parameters.valuestringThis is the actual value that was passed in for the element specified in the name field.

Occurrence: Conditional

responses.errors.parameters.namestringThis is the name of input field that caused an issue with the call request.

Occurrence: Conditional

responses.errors.longMessagestringA detailed description of the condition that caused the error or warning, and information on what to do to correct the problem.

Occurrence: Conditional

responses.errors.inputRefIdsarray of stringAn array of one or more reference IDs which identify the specific request element(s) most closely associated to the error or warning, if any.

Occurrence: Conditional

responses.errors.outputRefIdsarray of stringAn array of one or more reference IDs which identify the specific response element(s) most closely associated to the error or warning, if any.

Occurrence: Conditional

responses.warningsarray of ErrorDetailV3This container will be returned if there were one or more warnings associated with retrieving the inventory item record.

Occurrence: Conditional

responses.warnings.errorIdintegerA unique code that identifies the particular error or warning that occurred. Your application can use error codes as identifiers in your customized error-handling algorithms.

Occurrence: Conditional

responses.warnings.domainstringThe name of the domain in which the error or warning occurred.

Occurrence: Conditional

responses.warnings.subdomainstringThe name of the subdomain in which the error or warning occurred.

Occurrence: Conditional

responses.warnings.categorystringThis string value indicates the error category. There are three categories of errors: request errors, application errors, and system errors.

Occurrence: Conditional

responses.warnings.messagestringA description of the condition that caused the error or warning.

Occurrence: Conditional

responses.warnings.parametersarray of ErrorParameterV3Various warning and error messages return one or more variables that contain contextual information about the error or waring. This is often the field or value that triggered the error or warning.

Occurrence: Conditional

responses.warnings.parameters.valuestringThis is the actual value that was passed in for the element specified in the name field.

Occurrence: Conditional

responses.warnings.parameters.namestringThis is the name of input field that caused an issue with the call request.

Occurrence: Conditional

responses.warnings.longMessagestringA detailed description of the condition that caused the error or warning, and information on what to do to correct the problem.

Occurrence: Conditional

responses.warnings.inputRefIdsarray of stringAn array of one or more reference IDs which identify the specific request element(s) most closely associated to the error or warning, if any.

Occurrence: Conditional

responses.warnings.outputRefIdsarray of stringAn array of one or more reference IDs which identify the specific response element(s) most closely associated to the error or warning, if any.

Occurrence: Conditional

responses.skustringThe seller-defined Stock-Keeping Unit (SKU) of the inventory item. The seller should have a unique SKU value for every product that they sell.

Occurrence: Always

responses.inventoryItemInventoryItemWithSkuLocaleGroupKeysThis container consists of detailed information on the inventory item specified in the sku field.

Occurrence: Always

responses.inventoryItem.availabilityAvailabilityThis container is used to specify the quantity of the inventory item that are available for purchase if the item will be shipped to the buyer, and the quantity of the inventory item that are available for In-Store Pickup at one or more of the merchant's physical stores

Occurrence: Conditional

responses.inventoryItem.availability.pickupAtLocationAvailabilityarray of PickupAtLocationAvailabilityThis container consists of an array of one or more of the merchant's physical store locations where the inventory item is available for In-Store Pickup orders. The merchant's location, the quantity available, and the fulfillment time (how soon the item will be ready for pickup after the order takes place) are all in this container. In-Store Pickup is only available to large merchants selling on the US, UK, Germany, and Australia sites.

Occurrence: Conditional

responses.inventoryItem.availability.pickupAtLocationAvailability.availabilityTypeAvailabilityTypeEnumThe enumeration value in this field indicates the availability status of the inventory item at the merchant's physical store specified by the pickupAtLocationAvailability.merchantLocationKey field. This field is required if the pickupAtLocationAvailability container is used, and is always returned with the pickupAtLocationAvailability container.

See AvailabilityTypeEnum for more information about how/when you use each enumeration value.

Occurrence: Conditional

responses.inventoryItem.availability.pickupAtLocationAvailability.fulfillmentTimeTimeDurationThis container is used to indicate how soon an In-Store Pickup order will be available for pickup by the buyer after the order takes place. This container is required if the pickupAtLocationAvailability container is used, and is always returned with the pickupAtLocationAvailability container.

Occurrence: Conditional

responses.inventoryItem.availability.pickupAtLocationAvailability.fulfillmentTime.unitTimeDurationUnitEnumThis enumeration value indicates the time unit used to specify the fulfillment time, such as HOUR.

Occurrence: Conditional

responses.inventoryItem.availability.pickupAtLocationAvailability.fulfillmentTime.valueintegerThe integer value in this field, along with the time unit in the unit field, will indicate how soon after an In-Store Pickup purchase can the buyer pick up the item at the designated store location. If the value of this field is 4, and the value of the unit field is HOUR, then the fulfillment time for the In-Store Pickup order is four hours, which means that the buyer will be able to pick up the item at the store four hours after the transaction took place.

Occurrence: Conditional

responses.inventoryItem.availability.pickupAtLocationAvailability.merchantLocationKeystringThe unique identifier of a merchant's store where the In-Store Pickup inventory item is currently located, or where inventory will be sent to. If the merchant's store is currently awaiting for inventory, the availabilityType value should be SHIP_TO_STORE. This field is required if the pickupAtLocationAvailability container is used, and is always returned with the pickupAtLocationAvailability container.

Max length: 36

Occurrence: Conditional

responses.inventoryItem.availability.pickupAtLocationAvailability.quantityintegerThis integer value indicates the quantity of the inventory item that is available for In-Store Pickup at the store identified by the merchantLocationKey value. The value of quantity should be an integer value greater than 0, unless the inventory item is out of stock. This field is required if the pickupAtLocationAvailability container is used, and is always returned with the pickupAtLocationAvailability container.

Occurrence: Conditional

responses.inventoryItem.availability.shipToLocationAvailabilityShipToLocationAvailabilityThis container specifies the quantity of the inventory item that are available for purchase across one or more eBay marketplaces.

Occurrence: Conditional

responses.inventoryItem.availability.shipToLocationAvailability.quantityintegerThis container is used to set the total 'ship-to-home' quantity of the inventory item that will be available for purchase through one or more published offers. This container is not immediately required, but 'ship-to-home' quantity must be set before an offer of the inventory item can be published.

If an existing inventory item is being updated, and the 'ship-to-home' quantity already exists for the inventory item record, this container should be included again, even if the value is not changing, or the available quantity data will be lost.

Occurrence: Conditional

responses.inventoryItem.conditionConditionEnumThe numeric ID value of this field corresponds to the condition of the item. For a full list of condition identifiers, use the Trading API's GetCategoryFeatures call. Condition IDs can vary by category. - NEW, LIKE_NEW, NEW_OTHER, NEW_WITH_DEFECTS, MANUFACTURER_REFURBISHED, SELLER_REFURBISHED, USED_EXCELLENT,USED_VERY_GOOD, USED_GOOD, USED_ACCEPTABLE, FOR_PARTS_OR_NOT_WORKING

Occurrence: Conditional

responses.inventoryItem.conditionDescriptionstringThis string field is used by the seller to more clearly describe the condition of used items, or items that are not 'Brand New', 'New with tags', or 'New in box'. The ConditionDescription field is available for all categories. If the ConditionDescription field is used with an item in a new condition (Condition IDs 1000-1499), eBay will simply ignore this field if included, and eBay will return a warning message to the user. This field should only be used to further clarify the condition of the used item. It should not be used for branding, promotions, shipping, returns, payment or other information unrelated to the condition of the item. Make sure that the condition value, condition description, listing description, and the item's pictures do not contradict one another.Max length: 1000.

Occurrence: Conditional

responses.inventoryItem.packageWeightAndSizePackageWeightAndSizeThis container is used to specify the dimensions and weight of a shipping package.

Occurrence: Conditional

responses.inventoryItem.packageWeightAndSize.dimensionsDimensionThis container is used to indicate the length, width, and height of the shipping package that will be used to ship the inventory item. The dimensions of a shipping package are needed when calculated shipping is used.

This container will be returned if package dimensions are set for the inventory item.

Occurrence: Conditional

responses.inventoryItem.packageWeightAndSize.dimensions.heightnumberThe actual height (in the measurement unit specified in the unit field) of the shipping package. All fields of the dimensions container are required if package dimensions are specified.

If a shipping package measured 21.5 inches in length, 15.0 inches in width, and 12.0 inches in height, the dimensions container would look as follows:
"dimensions": {
"length": 21.5,
"width": 15.0,
"height": 12.0,
"unit": "INCH"
}

Occurrence: Conditional

responses.inventoryItem.packageWeightAndSize.dimensions.lengthnumberThe actual length (in the measurement unit specified in the unit field) of the shipping package. All fields of the dimensions container are required if package dimensions are specified.

If a shipping package measured 21.5 inches in length, 15.0 inches in width, and 12.0 inches in height, the dimensions container would look as follows:
"dimensions": {
"length": 21.5,
"width": 15.0,
"height": 12.0,
"unit": "INCH"
}

Occurrence: Conditional

responses.inventoryItem.packageWeightAndSize.dimensions.unitLengthUnitOfMeasureEnumThe unit of measurement used to specify the dimensions of a shipping package. All fields of the dimensions container are required if package dimensions are specified. If the English system of measurement is being used, the applicable values for dimension units are FEET and INCH. If the metric system of measurement is being used, the applicable values for weight units are METER and CENTIMETER. The metric system is used by most countries outside of the US.

Occurrence: Conditional

responses.inventoryItem.packageWeightAndSize.dimensions.widthnumberThe actual width (in the measurement unit specified in the unit field) of the shipping package. All fields of the dimensions container are required if package dimensions are specified.

If a shipping package measured 21.5 inches in length, 15.0 inches in width, and 12.0 inches in height, the dimensions container would look as follows:
"dimensions": {
"length": 21.5,
"width": 15.0,
"height": 12.0,
"unit": "INCH"
}

Occurrence: Conditional

responses.inventoryItem.packageWeightAndSize.packageTypePackageTypeEnumThis enumeration value indicates the type of shipping package used to ship the inventory item. The supported values for this field can be found in the PackageTypeEnum type.

This field will be returned if the package type is set for the inventory item.

Occurrence: Conditional

responses.inventoryItem.packageWeightAndSize.weightWeightThis container is used to specify the weight of the shipping package that will be used to ship the inventory item. The weight of a shipping package are needed when calculated shipping is used, or if flat-rate shipping rates are used, but with a weight surcharge.

This field will be returned if package weight is set for the inventory item.

Occurrence: Conditional

responses.inventoryItem.packageWeightAndSize.weight.unitWeightUnitOfMeasureEnumThe unit of measurement used to specify the weight of a shipping package. Both the unit and value fields are required if the weight container is used. If the English system of measurement is being used, the applicable values for weight units are POUND and OUNCE. If the metric system of measurement is being used, the applicable values for weight units are KILOGRAM and GRAM. The metric system is used by most countries outside of the US.

Occurrence: Conditional

responses.inventoryItem.packageWeightAndSize.weight.valuenumberThe actual weight (in the measurement unit specified in the unit field) of the shipping package. Both the unit and value fields are required if the weight container is used. If a shipping package weighed 20.5 ounces, the container would look as follows:
"weight": {
"value": 20.5,
"unit": "OUNCE"
}

Occurrence: Conditional

responses.inventoryItem.productProductThis container is used in a createOrUpdateInventoryItem call to pass in a Global Trade Item Number (GTIN) or a Brand and Manufacturer Part Number (MPN) pair to identify a product to be matched with a product in the eBay catalog. If a match is found in the eBay product catalog, the inventory item is automatically populated with available product details such as a title, a subtitle, a product description, item specifics, and links to stock images for the product.

Occurrence: Conditional

responses.inventoryItem.product.aspectsarray of stringThis is an array of item specific pairs that provide more information about the product and might make it easier for buyers to find. To view required/recommended product aspects/item specifics names (and corresponding values) for a specific eBay category, sellers can use the GetCategorySpecifics call of the Trading API. Alternatively, sellers can view similar items on eBay.com in the same category to get an idea of what other sellers are using for product aspects/item specifics.

Sellers also have the option of specifying an eBay Product ID (ePID) or optionally, a Global Trade Item Number (GTIN) through the corresponding fields in the product container in an attempt to find a product match in the eBay Catalog. If a match is found based on the ePID or GTIN value, the product aspects that are defined for the eBay Catalog product will automatically get picked up by the newly created/updated inventory item.

Below is an example of the proper JSON syntax to use when manually inputting item specifics:

"aspects": {
"Brand": ["GoPro"],
"Storage Type": ["Removable"]
}

Note that inventory items that will become part of an inventory item group and multiple-variation listing should have the same attributes that are defined for the inventory item group.

This container will be returned if one or more item specific pairs are defined for the inventory item.

Max Length for Aspect Name: 40

Max Length for Aspect Value: 50

Occurrence: Conditional

responses.inventoryItem.product.brandstringThe brand of the product. This field is often paired with the mpn field to identify a specific product by Manufacture Part Number. This field is conditionally required if the eBay category requires a Manufacturer Part Number (MPN) value. If eBay is able to find a product match in the eBay Catalog when an eBay Product ID (ePID) or GTIN value (UPC, ISBN, or EAN) is supplied, all product details of that eBay Catalog product is picked up by the inventory item record (including brand) if the createOrUpdateInventoryItem call is successful.

This field is returned if defined for an inventory item. If a brand was passed in as an item specific name-value pair through the aspects array in a createOrReplaceInventoryItem call, this value is also picked up by the brand field.

Max Length: 65

Occurrence: Conditional

responses.inventoryItem.product.descriptionstringThe description of the product. The description of an existing inventory item can be added or modified with a createOrReplaceInventoryItem call. The description of an inventory item is automatically populated if the seller specifies an eBay Product ID (ePID) or a Global Trade Item Number (GTIN) and eBay is able to find a matching product in the eBay Catalog.

Note that this field is optional but recommended. If a listingDescription field is omitted when creating and publishing a single-variation offer, the text in this field will be used instead. If neither the product.description field for the inventory item nor the listingDescription field for the offer exist, the publishOffer call will fail. If the inventory item will be part of an inventory item group/multiple-variation listing, this field should definitely be used to specify how the corresponding product variation is different (e.g. This is the green, extra-large version of the shirt). However, in the case of an inventory item group, the text in the description field of the inventory item group will become the listing description of the actual eBay listing instead of the text in this field.

Basic HTML tags are supported, including the following tags:
  • <b>
  • <strong>
  • <br>
  • <ol>
  • <ul>
  • <li>
  • Table tags including <table>, <tr>, <td>, <th>, <thead>, <tfoot>, <tbody>, <caption>, <colgroup>, and <col>
A seller can not use any active content in their listing description. Active content includes animation or video via JavaScript, Flash, plug-ins, or form actions.

This field is returned if defined for an inventory item. If one of the GTIN types (e.g. UPC) was passed in when the inventory item was created/modified and a product match was found in the eBay catalog, product description is one of the details that gets picked up from the catalog product.

Max Length: 4000

Occurrence: Always

responses.inventoryItem.product.imageUrlsarray of stringAn array of one or more links to images for the product. URLs must use the "HTTPS" protocol. Images can be self-hosted by the seller, or sellers can use the UploadSiteHostedPictures call of the Trading API to upload images to an eBay Picture Server. If successful, the response of the UploadSiteHostedPictures call will contain a full URL to the image on an eBay Picture Server. This is the URL that will be passed in through the imageUrls array. Before an offer can be published, at least one image must exist for the inventory item. Most eBay sites support up to 12 pictures free of charge, and eBay Motors listings can have up to 24 pictures.

A link to a stock image for a product may automatically be populated for an inventory item if the seller specifies an eBay Product ID (ePID) or a Global Trade Item Number (GTIN) and eBay is able to find a matching product in the eBay Catalog.

This container will always be returned for an inventory item that is part of a published offer since a published offer will always have at least one picture, but this container will only be returned if defined for inventory items that are not a part of a published offer.

Occurrence: Conditional

responses.inventoryItem.product.mpnstringThe Manufacturer Part Number (MPN) of a product. This field is paired with the brand field to identify a product. Some eBay categories require MPN values. The GetCategorySpecifics call of the Trading API can be used to see if a category requires an MPN. The MPN value for a product may automatically be populated for an inventory item if the seller specifies an eBay Product ID (ePID) or a Global Trade Item Number (GTIN) and eBay is able to find a matching product in the eBay Catalog.

This field is returned if defined for an inventory item. If an MPN was passed in as an item specific name-value pair through the aspects array in a createOrReplaceInventoryItem call, this value is also picked up by the mpn field.

Max Length: 65

Occurrence: Conditional

responses.inventoryItem.product.subtitlestringA subtitle is an optional listing feature that allows the seller to provide more information about the product, possibly including keywords that may assist with search results. An additional listing fee will be charged to the seller if a subtitle is used. For more information on using listing subtitles on the US site, see the Adding a subtitle to your listings help page. The subtitle of an existing inventory item can added, modified, or removed with a createOrReplaceInventoryItem call.

Note that the same subtitle text should be used for each inventory item that will be part of an inventory item group, and ultimately become one product variation within a multiple-variation listing.

This field will only be returned if set for an inventory item.

Max Length: 55

Occurrence: Conditional

responses.inventoryItem.product.titlestringThe title of an inventory item can be added or modified with a createOrReplaceInventoryItem call. Although not immediately required, a title will be needed before an offer with the inventory item is published. The title of an inventory item is automatically populated if the seller specifies an eBay Product ID (ePID) or a Global Trade Item Number (GTIN) and eBay is able to find a matching product in the eBay Catalog. If the inventory item will become part of a single-variation offer, and the listing is not a product-based listing, the text in this field will become the actual listing title for the published offer. However, if the inventory item will become part of a multiple-variation offer, the text in title field of the inventory item group entity will actually become the listing title for the published offer instead, although a title can still be provided for the inventory item, and it will actually become the title of the variation.

This field will always be returned for an inventory item that is part of a published offer since a published offer will always have a listing title, but this field will only be returned if defined for inventory items that are not a part of a published offer.

Max Length: 80

Occurrence: Always

responses.inventoryItem.product.isbnarray of stringThe International Standard Book Number (ISBN) value for the product. Although an ePID value is preferred when trying to find a product match in the eBay Catalog, this field can also be used in an attempt to find a product match in the eBay Catalog. If a product match is found in the eBay Catalog, the inventory item is automatically populated with available product details such as a title, a product description, product aspects (including the specified ISBN value), and a link to any stock image that exists for the catalog product.

This field is returned if defined for an inventory item. If an ISBN was passed in as an item specific name-value pair through the aspects array in a createOrReplaceInventoryItem call, this value is also picked up by the isbn field.

Occurrence: Conditional

responses.inventoryItem.product.upcarray of stringThe Universal Product Code (UPC) value for the product. Although an ePID value is preferred when trying to find a product match in the eBay Catalog, this field can also be used in an attempt to find a product match in the eBay Catalog. If a product match is found in the eBay Catalog, the inventory item is automatically populated with available product details such as a title, a product description, product aspects (including the specified UPC value), and a link to any stock image that exists for the catalog product.

This field is returned if defined for an inventory item. If a UPC was passed in as an item specific name-value pair through the aspects array in a createOrReplaceInventoryItem call, this value is also picked up by the upc field.

Occurrence: Conditional

responses.inventoryItem.product.eanarray of stringThe European Article Number/International Article Number (EAN) for the product. Although an ePID value is preferred when trying to find a product match in the eBay Catalog, this field can also be used in an attempt to find a product match in the eBay Catalog. If a product match is found in the eBay Catalog, the inventory item is automatically populated with available product details such as a title, a product description, product aspects (including the specified EAN value), and a link to any stock image that exists for the catalog product.

This field is returned if defined for an inventory item. If an EAN was passed in as an item specific name-value pair through the aspects array in a createOrReplaceInventoryItem call, this value is also picked up by the ean field.

Occurrence: Conditional

responses.inventoryItem.product.epidstringThe eBay Product Identifier (ePID) for the product. This field can be used to directly identify an eBay Catalog product. Based on its specified ePID value, eBay will search for the product in the eBay Catalog, and if a match is found, the inventory item is automatically populated with available product details such as product title, product description, product aspects, and a link to any stock image that exists for the catalog product.

This field is returned if defined for an inventory item.

Note: For the US, UK, CA (English), and AU sites, eBay is starting to require that some products in certain eBay categories be associated with an eBay Catalog product. For more information on this requirement, see the Product-Based Shopping Experience Playbook topic in the Selling Integration Guide. In an attempt to find a eBay Catalog product match, an ePID value is always preferred over the other product identifiers, since it is possible that one GTIN value can be associated with multiple eBay Catalog products, and if multiple products are found, product details will not be picked up by the Inventory Item object.

Occurrence: Conditional

responses.inventoryItem.skustringThe seller-defined Stock-Keeping Unit (SKU) of the inventory item. The seller should have a unique SKU value for every product that they sell.

Occurrence: Conditional

responses.inventoryItem.localeLocaleEnumThis field is for future use only.

Occurrence: Conditional

responses.inventoryItem.inventoryItemGroupKeysarray of stringThis returns the inventoryItemGroupKeys this inventory item is associated with for MSKU listings

Occurrence: Conditional

HTTP status codes

This call can return one of the following HTTP status codes. For an overview of the status codes, see HTTP status codes in Using eBay RESTful APIs.

StatusMeaning
200Success
207Multi-Status
400Bad Request
500Internal Server Error

Error codes

For more on errors, plus the codes of other common errors, see Handling errors.

CodeDomainCategoryMeaning
25001API_INVENTORYAPPLICATIONAny System error. {additionalInfo}
25702API_INVENTORYREQUESTSKU {additionalInfo} is not available in the system
25708API_INVENTORYREQUESTInvalid SKU.
25709API_INVENTORYREQUESTInvalid request. Invalid value for field {additionalInfo}
25727API_INVENTORYREQUESTThe number of InventoryItems in the request cannot exceed {additionalInfo}.
25734API_INVENTORYREQUESTSKU should be unique in the request.

Samples

New to making API calls? Please see Making a Call.

Note: Identifiers, such as order IDs or user IDs, and personal data in these samples might be anonymized or may no longer be active on eBay. If necessary, substitute current, relevant eBay data in your requests.

Sample 1: Bulk Get Inventory Items

This example will retrieve two inventory items.

Input

This call retrieves two inventory items. The seller-defined SKU values for the inventory items to be retrieved are passed in through the request payload.
POST
https://api.ebay.com/sell/inventory/v1/bulk_get_inventory_item

Output

Other details provided for these inventory items include listing title, listing description, item condition, product aspects, URL to item images, and quantity available.